AICS Short Action Magazine

AICS magazines are outragously expensive so I decided to make my own 3d printable version.

I have a christinsian arms MPR this uses short action AICS pattern magazines.

I modeled this magazine off a christinsian arms magazine. This should fit any gun that uses the AICS standerd. 

ASSEMBLY:

After printing all the parts I used a spring from an old hex mag. I cut the spring in half and stuck it in my magazine. 

1-flip the housing over to see the bottom

2-insert the follower

3-insert the spring

4-insert the base lock

5-press the base lock and slide the base until the rectangle clicks into place