July 20, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kexcelled White Transmission Distance: 4
PLA Geeetech New Pink Transmission Distance: 6.4
PLA Elegoo Black Transmission Distance: 0.3
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to New Pink
At layer #19 (1.6mm) swap to Black for the rest.
Do not change the Z height but you can change the X and Y by the same percentage.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Dirk Schröder
