Citadel paint holders for Threadboards

These are basic thread boards holders, of various sizes, suitable for Citadel paints. These paint bottles are 33 in diameter, so anything around there would fit. I've also made a similar set for the Duncan Rhodes Paint Academy range of paint bottles (which are 24mm in diameter), as well as a set for spray paint. All for mounting on the Threadboards (kickstarter).

For the Duncan Rhodes PA models, see this page.

Updates

• 2024-08-10: I made a minor fix to the walls, and also uploaded the STL files. I've had some problems with PrusaSlicer and the STEP files, so providing both for now.

Printing

Some of these models will require a larger printer, such as the Prusa XL, but most of them should print fine on the MK3 and MK4. You may have to rotate the model 45 degrees, to allow them to fit on your plates.

The two Trimmed versions are the larger models with some corners trimmed out, necessary to print on some printers. They may still not fit on the Prusa MK3/4 though.

Sizes

The holders comes in two main models: 

• Single Row
• Double Row, in a terrace layout

I personally don't really like the Double Row, because I like to see the full label of each paint. However, they are still useful, particularly for storing larger amounts of paint bottles.

The sizes varies based on the number of paints each model holds. The names are the width and the length of the model, as well the number of paint bottles it holds.