July 21, 2024
Description
Super simple markers to remind you which height to set your rack cups, spotters, attachments etc. at for different exercises.
I use the 50mm Base Plate then add the words in myself in the desired font (Apple LiGothic) in PrusaSlicer. I've also included a slightly wider plate for a 60mm rack and some examples for a few exercises.
There are holes on the back for 5x2mm magnets. Depending on your printer you might need to widen the hole or conversely stick the magnet in with a bit of super glue
License:
Creative Commons — Attribution — Noncommercial
11
PrinterIsComing
