Google indoor cam holder for Prusa original enclosure

I use a google indoor cam to monitor my printer. I made a holder that eliminates the bulky original camera foot and bolts into the OEM Prusa enclosure.
It requires removing the 2, T8 torx screws from the cam base and you need to repurpose the shiny 5,5mm bolt (look at pictures). You'll also need 2* 12mm allen screws (again see pictures) that can be found in your spare parts bag ;-)

They just screw into the PETG model, no (more than strong enough!).
Intended to mount on the holes 1 row below the center holes (others don't fit).

Please post a make if you print it!  :-) 

Printer settings I used:

• PETG
• 15% infill
• only supports at the camera mount required
• 0,4mm nozzle
• 0,2mm layer height
• 3 perimeters