July 22, 2024
Description
A minimalist filament passthrough and guide for the Sunlu S2 filament dryer that doesnt require drilling, screwing or gluing. This little adapter wil just slide in and friction fit. Accepts a short (~10cm) length of 4mm OD PTFE/capricorn tube. Remove the factory tube insert first.
Tube can exit either near-vertical or near-horizontal. If the latter, and the spool is mounted above the printer, the guide part can be printed and attached to the outside of the S2 as shown. Without the guide, the PTFE tube may kink.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
chylld
