Nextion 5" case

A friend had a Nextion 5" display which I offered to print a case for, all I could find suitable was the bezel from their Web page so created a back case in Fusion 360 and this is the result. As mentioned elsewhere the bezel doesn't print well, I had to use a Brim when I  did it. The model number for his PCB is NX8048K050_011 if that is of relevance. 

My case prints well there is a 5mm hole for the wiring loom to exit, four 3.5mm holes to use 3x20mm screws to attach the bezel, although I designed in countersink holes they need a tidy up with a countersink tool, there are no spacers inside so care must be taken to prevent overtightening, don't ask me how I know!