July 23, 2024
Description
Small print-in-place corner shelves. Two styles and two different heights. Scale from there. STEP files are provided for customization. You don't have to use them in corners if you don't want to :) I'll probably post ‘non’-corner versions at some point.
Some storage possibilities:
Printing:
You need ‘good’ cooling to keep the overhangs from distorting/curling. Using PLA on the X1C, I oriented the models to align with the aux cooling fan and ran the fans full blast with the door open. If you want to avoid rough front surfaces on the ‘rounded’ models, I suggest variable layer height--though this can cause some banding/color inconsistency with some materials. See 3mf file for my settings if you need guidance. I also found with these models printing outer walls first gave the best surface finish free of ghosting/ringing.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
fsanders
