Vertical Monitor Stand Viewsonic and Universal

This is a one way adjustable stand made specifically for a ViewSonic VA2419-SH base plate, HOWEVER you could a sheet of any material and drill holes for m5 screws to pass through, with a 32.75 center to center spacing. The stand supports any size of monitor as long as it has a VESA mount and also as long as you make the 30mm pipe long enough.

Needed Materials:

• 30mm Pipe x1
• m4 * 8mm socket head x6
• m4 washers x6
• m3 * 12mm socket head x2
• m3 * 16mm socket head x1
• m3 * 6mm heatset insert x2
• m3 * 8mm heatset insert x1
• m5 * 20mm x1 
  • any type, unless using ViewSonic baseplate, then use a pan head

Material and Settings:

I recommend petg or better just because you don't want it dropping your monitor

Printed with 5 perimeters and 15% infill

Print orientations are in the pictures, regarding the file “Vesa plate” no support is needed in this orientation as the design has support designed in.