Huina Excavator Blade

This is a blade/plow for my 3D printed Huina Undercarriage

• Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque
• Requires my complete Undercarriage, will not fit the stock one !
• • https://www.thingiverse.com/thing:3766084

• Requires a modified remote for the additional channel,will not work with stock 550 remote.

• Requires an additional brushed ESC to plug the N20 motor into (10 amp is fine)
• Requires a couple ~2.5mm holes to be drilled and (12x) M3 screws of various lengths
• Added a complete blade if you don't want to print in 2 parts
• UPDATE : New N20_case_half_v2, blade_frame_middle_v2, blade_cylinder and upper_mount_v2
  Tested working October 2, 2019 !
  Comments / Suggestions welcome.

I got lots of people adding this to their "Warhammer 40k" collections. Not sure why, but this is NOT related to Warhammer. This is a part for a remote controlled toy excavator sold as the "Huina 1550"

Print instructions

Category: R/C Vehicles