July 24, 2024
Description
This is a Hueforge STL of an Eevee/Umbreon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 139.25x215.61mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #13 (1.12mm) swap to Silver
At layer #20 (1.68mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Reepime
