Wrapping Paper Organizer - fits 10 rolls

I was sick and tired of my wrapping paper rolls laying all over the place and I didn't want to buy an ugly case so I decided to model myself a wall mounted organizer that prints in 2 pieces and doesn't require any support. The end result is a simple yet effective organizer with which I finally got rid of the clutter and have it neatly organized on the side of my cupboard. The organizer is only 7cm in depth because I had to deal with a space constraint in a rather small office space.

To mount the trays I used 4x 5mm/32mm | 5mm/1" screws from the IKEA Fixa screw set, but any screw that is close to this size will do. Watch out when screwing them in that you don't go too deep as this can split the model (I accidentely did on one tray). For renter friendly purposes I have also included a version with which you can mount the organizer using double sided tape/command strips.

The organizer holds around 10 standard sized rolls but you can squash some more in there if you want to. I hung my top ring 20cm above the bottom tray so that I could accomodate for some odd sized left-over pieces of wrapping paper.