Abus GRANIT SLEDG 77 lock holder for S1000R

Do you have a S1000R (2021 and up)? Great bike! problem is, thieves think the same! so now you have to cary a brake lock or a chain with you to lock your bike. Unfortunately the S1000R doesn't have much space to stow a lock on/in. 

If you're like me, you already removed the buddy seat and foor pegs. What a great opportunity to reuse the screws and spot to attach a lock holder there.

I designed this specifically for Abus GRANIT SLEDG 77 lock and the SH SLEDGE 77 LOCK CARRIER (but if you're creative enough you can screw any other holder there as well). 

1. Print the holder,
2. Screw in the Carrier in place on the holder, 
3. Then screw the holder where the foot peg used to be (I placed it on the Left side) 
4. Optionally: For the cleanest result I removed the Sledg 77 lock's plastic cover

• Printed with Bambu X1C
• 0.20 mm Strength
• Print with ASA filament for best result+durability
• I printed it with 90% infill
• Use Brim and support to make sure everything stays nice and clean during printing

Disclaimer:

Although I have this on my bike for several weeks now without any issues, please understand that the print might snap or melt and if that happens your lock could fall off. So, please print and use at your own risk!