Phone holder and magnetic connector charger

This is a remake of https://www.thingiverse.com/thing:2370836

I made for my daughters a phone holder with a charging base with a wire and a magnetic connector. I used this wire which is available with the connector for iPhones and other phones with USB connectors.

The two supports were made on a special occasion and bear the names of my daughters; the file I am attaching is neutral, without names.

The tail file is common for all versions, while the body is availableneutral, with thebass or with thedancer. The tail, in addition to holding everything, blocks the cable and allows it to come out from the left or right.

Print body on the back without supports and tail in the final position. Theballerina and thebass were filled with paint.
Hope you like it, let me know!

Good print!

If you found it useful, and if you like, you can offer me a coffee!, it will be an extra motivation to continue designing.

ASSEMBLY
1) Mount the magnetic connector on the phone and place the phone on the support;
2) insert the cable from underneath into the hole up to the magnetic coupling;
3) bend the cable 90 ° and partially insert the tail;
4) orient the cable to the right or left and complete the insertion of the tail.
That's all!

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.20

Infill: 

20

Filament:
No brand I used PLA As you want

Category: Mobile Phone