Spool holder for Ender 3 PRO

This spool holder allows to adapt very well coils of any diameter/size (or almost) and to load/unload them very quickly as a 7mm pitch has been used which allows you to go from minimum to maximum in just 8 turns.
The spool holder slides on 3 rings to minimize the contact surface and thus minimize friction. However, it is good to put a little layer of grease on it to avoid squeaks and you will see that it will turn even better, as if it had bearings (watch as work).
Good print!

22/12/2020
I moved the screw inward to be able to mount screws with the larger head

If you found it useful, and if you like, you can offer me a coffee!, it will be an extra motivation to continue designing.

Thanks to Google Translator for help with translation. ;)

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.28

Infill:

Filament:
No brand I used PLA As you want

Notes:

Category: 3D Printing