Shelf Pegs (3mm) XS (Beveled / Flat Ends)

There are 3 types with variable lengths.

The Beveled End (B) is the end you put into the hole.

The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf with various lengths).

Four pegs are needed for each shelf that you want to fit into your shelf unit.

There are 4 lengths available for both the hole end and the shelf end. These are 5mm, 8mm, 10mm and 13mm. These are coded in the file name as: 5B, 8B, 10B, 13B (Beveled end) 5F, 8F, 10F, 13F (Flat End) and 5R, 8R, 10R, 13R (Round End). You can use whatever mix you want. The overall length of the pegs are 11mm, 12.5mm, 14mm, 15.5mm, 16mm, 17mm, 17.5mm, 18mm, 18.5mm, 19mm, 19.5mm, 20.5mm, 21mm, 22mm, 22.5mm, 23.5mm, 24mm, 25.5mm, 27mm and 28.5mm depending on the length of the ends you want. Each peg has a (1mm protrusion) spacer (5mm diameter) included to prevent the peg going too far into the hole.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.7.2 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees

Infill: 100%

Supports: No

Skirt: No

Brim: No / Optional

Raft: Yes / Optional

Enjoy.

                           https://www.buymeacoffee.com/tigertone