July 28, 2024
Description
Very simple print to hold and display jewelry such as necklaces and pendant necklaces.
Do not print in vase mode - it is already hollow and should print 2 walls thick so it is a little more rigid.
There are three holes at the back where you can use M3 screws to wrap and hold the necklaces. You can see in one of the photos an example of how I've routed this necklace for display. You can wrap as many times as necessary to get the proper length of slack taken up.
If you are also into laser engraving this model appeared in my following video for the xTool F1 ULTRA:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Embrace Making
