December 17, 2021
Description
The ears are meant to be printed with flexible filaments - like TPU or Nylon. Do not print them with PLA - having rigid ears on a costume is not a good idea.
These parts were made as a flexible base for movable fursuit ears. The holes in the stiffened part are for attaching a Bowden cable - simple animatronics, made by pushing/pulling on a steel cable.
Printer:
Alfawise U10
Rafts:
No
No
Resolution:
0.2mm
15%
Filament: TINMORRY TPU White
Category: CostumeLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
Tioh
