August 26, 2024
Description
Mug is in 3 versions
Original with a castle facing the user (right-handed)
Flipped with castle on the other side
No-castle with just Krasnystaw coat of arms on the both sides
---
More Beer Mugs
https://www.printables.com/@C47_3d/collections/758477
---
It was made to be used on festival to drink beer sold in 0,5l plastic cups - mug printed in 120% sizeÂ
Works with Nicknack cups (there is a bulge that will go in the cup's holder hole) - 120% size , you can try 119% or 119,5% if you want the cup to hold more firmly
Easier to use than a cup and safer to use than drinking from a print
You can also use it with bottled beer (100% size), beer can (94%) or just for a decoration
I also used it with 0.5l stainless steel inserts. Mugs were printed in 115% size (may differ depending where you get the inserts)
Fits standard diameter beer bottle (there is a 72mm hole)
You can resize the model in slicer for different diameters
Use the equation:
X / 72 * 100%
where X stands for the diameter you want with added 1-2mm (for a 'safe distance')
So for example for a beer can (66mm, so X will be 68) you need ~94,5% size
Remember to check the widest area (like the bottom of the bottle or top of the cup under the rim)
If you printed it slightly too big you can use a fileÂ
BeerMug_Chmielaki2024_reducer
with the same size as a mug. It will reduce the hole diameter a little
I used it on one print to fit better the steel insert (you can see it on photos) - I glued it but it can work without it
---
Printed on Bambu Lab A1 with:
Spectrum Filaments - Premium PLA - Flipflop Green
Devil Design - Silk PLA - Gold
Spectrum Filaments - Silk PLA - Spicy Copper
Devil Design - Silk PLA - Bronze
Geeetech - Silk PLA - Rainbow
3D Jake - magicPLA - Metallic Emmerald
Prusament - PLA Blend - Viva La Bronze
Photos with filament names
https://www.instagram.com/p/C-F6w5cN1_w/
Video with Nicknack cup
https://www.instagram.com/reel/C-KXH_8N6Nb/
Video with 4 sizes of mugs
https://www.instagram.com/reel/C-SyAjjNAtN/
Models made in Blender 3D
The city coat of arms is from 2022 version with small changes
---
Printed withÂ
0.4 nozzle
0.2 layer height
3 walls (perimeters)
7% honeycomb infill
7 top and 5 bottom layers
No supports
On 120% size it is around 180g of filament used
Z-seam set to 'aligned' / 'sharpest corner' or 'user defined' and set to centerÂ
The seam should be in the 'channels' in the mug
---
Update 05 VIII 2024
Fixed a bridge on handle, should print little better
---
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
C47_3d
