July 30, 2024
Description
Simple ASUS Zenbook UX3404 riser for better cooling.
The riser will certainly work with other Zenbooks too. The riser is 15mm.
The gap for the rubber lip of the notebook is 6mm and 5mm high.
The total length of the riser is 20cm.
The angle for the support is precisely calculated, the notebook rests on the entire surface.
For licensing reasons, the ASUS ROG logos had to be removed. If you want, you can insert them yourself.
Printed with Creality Hyper PLA in gray
Nozzle temp. 220°C
Bed temp. 45°C
Speed 300mm/s
Infill 10%
Brim 5
I have printed with some supports for supporting the letters
I got very good results with my prints
Recommendation: Stick thin (1mm) rubber feet for better stability. You can see examples in the pictures
If you have any questions or suggestions, send me a message
License:
Creative Commons — Attribution — Noncommercial
SpackenJaeger
