Son of Godzilla figurine.

Godzilla and Son of, in their final scene from the movie. Suitable for making a  figurine out of or use in a 4"/100mm water globe (with opening size of ~58mm.) I suggest using “organic” or tree suppots if FDM, and sparse lightning infill with 3-4 walls minimum, no bottom layers. What I've done in the accompanying photos was remove all the lightning supports after printing, and filled the entire print with 2 part instant/5 minute epoxy. After painting, since it was going into a snowglobe, I coated the entire outside in 20 minute “nice” epoxy from the hobby shop to hopefully provide a watertight seal (time will tell.)

Apologies for the immense STL and 3mf file- the final .blend itself is some 1.8Gb so cannot be uploaded. I managed to get the .blend of the finished piece down to 340 some Mb, it's quite overboard, and I'll try to get the separated detailed meshes of the two figures uploaded if there's interest. So, if you're looking to make your own scenery similar to this it's probably better to go to the sources themselves and start from there :-)