Sovol Sv06 Motherboard Hanging Plate Shifter

This model is used to shift the motherboard of Sovol SV06 a bit to accomodate the motherboard fan mod as well as the nautilus fan mod.

When I did the Type A fan mod for motherboard (Link Below), the nautilus fan was crashing with the 92mm fan on the motherboard.

There were three options - 

1. Reduce the build plate printable area
2. Install a slim 15mm fan (rarely available and costly) instead of the 25mm fan (cheap and readily available)
3. Shift the motherboard to the left so that the nautilus fan does not crash with the 92mm fan.

I opted for the third option. 

Here's the link to motherboard fan mod : https://www.printables.com/model/565011-sovol-sv06sv06-plus-ultimate-motherboard-fan-mod-9/comments

Here's the link to the nautilus fan mod : https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v

Print instructions - 

• no support needed.
• you can attach the hooks with a 4mm screw and/or some glue. I have separated them so that no support needed. Other printer screws can be reused.

[UPDATE]

Added another model to shift the motherboard a bit more to the left so that the Ammonite fan would not crash with the motherboard box