December 17, 2021
Description
This is a little vice I designed to hold pen blanks at 90° while I drill them on the drill press.
The knobs have imbedded 5/16" nuts. The print will need to be paused at 13.6mm to insert the nut, then resume the print.
You will also need: 2x 5/16" hex nuts, 2x 5/16" x 2 ½" bolts.
I printed at .20 layer height with 25% infill using PLA.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Steve
