Cable/Test Lead Hanger/Holder (Clamp-On)

Small clamp-on cable hanger for your electronics lab… Clamps onto workbench shelving, light scaffolding, etc. Cable slots are ~5mm wide.

Printing:

No support required for the supplied orientation. Suggest 3 perimeters and ~25% infill for strength. Note that you'll need to print the bolt corresponding to the side you're using. Sorry--it became slow/tedious enough trying to work with the mesh that the two sides are a simple ‘mirror’ of each other. I'm not trying to start a left-hand thread trend--just being lazy. 

Thanks to McAbra for the original design--I use several of his headphone holders around the house/home office…