Quad PTFE Connector for Prusa XL

These PTFE joiners use M5 connectors to load flexible filaments such as TPU much easier. The length of the PTFE tubing for the Prusa XL is so long that by the time you reach the extruder you cannot exert enough pressure to load the filament. This connector allows you disconnect the tubing magnetically and to reach the filament to push it into the extruder. Print 2 of these connectors with no supports. I would use ASA or some other lightweight, heat resistant material.

Hardware:

8    5x3mm Magnets

1     Festo Double Nipple NPFC - DS - M5 - M     Part# 8142592  or similar

https://www.festo.com/us/en/a/8142592/?q=8142592%7E%3AfestoSortOrderScored