Electric cord organizer for Westinghouse ePX3100v pressure washer

This pressure washer comes with a hardwired cord that's about 10 miles long, which gets pretty unwieldy when moving it around. This model adds a little “bollard” on top of the handle, which the cord can be wrapped around. The electric plug then plugs into the bollard to keep everything in place during storage.

I printed this in PETG. There are two parts:

1. Handle adapter. Print this standing straight up on one of its ends, no supports needed. Attach it to the pressure washer's handle with 3 zip ties.
2. Bollard. Print this lying on its side. No supports needed. Insert 2x M5 nuts after the print, near its base.

Attach the two parts together with 2x M5 20mm bolts. These bolts get inserted from the bottom of the handle adapter, into the bollard, through the “captive” nuts.