May 23, 2026
Description
⭐ Love the GEN2 system?
Support the project by joining the Jerrari Club or picking up a premium faceplate collection, it means a lot and helps fuel future designs.
|
|
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.
Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.
DECOR DRAWERS
This drawer features a modular face allowing you to install customizable faceplates on the front that you can change at any time. It also lets you print the majority of the drawer with less expensive material and use only your most precious filaments on the faceplate. Find all the faceplate HERE
The 185 Collection offers decent storage volume while also maintaining compatibility with the widest range of 3D printers. Find all compatible 185 collection models here HERE
Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and wall mount locations.
Find these kits at JERRARI3D/gen2-modular-system
Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds | Mount GEN2 cases and drawers to almost any vertical surface using the GEN2 Wall Mount – Lite. Once installed, your layout is secure, modular, and easy to expand or rearrange anytime. |
GEN2 Case - GEN2 Drawers fit into GEN2 Cases of equal size, you can find the matching case for your drawer here:
Visit Jerrari3D.com for a list of all compatible drawers and cases.
DECOR DRAWER FACEPLATES (Attach to the front of GEN2 Decor Drawers):
See Full Collection at Jerrari3D.com
Understanding Part Names
GEN2 drawers are titled by length, width and height, such as in this example.
Includes affiliated links to help support my projects
• Filament
- PLA (Easy to print, works great for most parts)
- PETG (Stronger and tougher, but can warp more)
• Screwdriver
• Magnets (Optional): 10x2mm or 6x2mm
• M3 nuts and screws: Stainless-Steel or Steel
UNDER TABLE (GEN2 RAILS) HARDWARE
• Countersunk woodscrews: (SAE: #6 or #8 up to 1/2" or longer) or (Metric: 3.5x16mm or longer)
• Drill bit that is smaller diameter than the wood screws (My Recommendation)
• Pen, Marker, or Scratch Awl (for installing under tables)
🔧Visit Jerrari3d.com for Step-By-Step Instructions
UPDATE:
• NEW Magnet Clip - This replaces the magnet slots with a more reliable and universal design.
Tip:
Printing large models near the edge of a printer's build plate can sometimes lead to edge curling up deforming the rail. Here are some ways you can combat this:
- Clean your entire build sheet using detergent or 99% iso alcohol, additional adhesion can be achieved with glue sticks or adhesion promoters like Nano Adhesive
- Print with an enclosure to prevent drafts and cooler temperatures, preheat the enclosure for a few minutes prior to printing.
- After the print completes wait for the build plate to lower to room temp before removing the model.
- You can always print with materials that print easier and warp less during printing such as PLA
Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍
License:
Creative Commons — Attribution — Noncommercial — Share Alike
6
Jerrari
