October 14, 2025
Description
"I present to you the model I designed to replace the original spool holder of the Flashforge Adventurer 5M. Printed in PLA or PETG, it fits better and is more smooth, with similar dimensions and the same depth footprint.
Adapted to use the original screws.
Printing Info
it is preferable to print with good infill in the base for the first 5mm to ensure adequate strength for the weight of the filament spool.
Layer Height: 0.2mm
Wall: 3 or more;
Infill: Base(0-5mm) should have an infill of at least 50% with 4 walls, while the rest can have 35% infill with 3 walls.
Materials: PLA, PETG.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
3DPrintDesigns.it
