Qidi 6.08 Mono Larger Filter Towers

I thought the carbon filter towers & activated charcoal packets on the Qidi 6.08 Mono looked a bit puny, so I put together a version that can contain the activated charcoal filter refills for Keureg Classic style pod coffee makers. My version consists of two pieces which can be separated to allow insertion of a filter refill. Left & right versions of the base accommodate the cover being place during print operations. A second version of the filter tower (2c), twice as tall, should hold two filters.

Although the charcoal filter towers look like active filters, there is no fan underneath to pull air through. With all the air flow available from the holes in the bottom, it seems unlikely there would be enough negative pressure generated by the exhaust fan at the back on the openings beneath the filters to encourage air movement. They still may have a beneficial effect, but I believe it would be in a passive adsorbtion fashion.

source files here:
https://www.tinkercad.com/things/hgrWdQRt1iC

Category: 3D Printer Parts