December 17, 2021
Description
A filament spool roller for use on a flat surface. I use this on my "lack" printer enclosure. The rollers use a total of four 608RS type bearings. The base has four holes for screws to secure it in place if desired. It should accommodate spools up to about 75mm in width. Stub axles on the roller ends fit into the bearings. The bearings sit in the depressions on the base. It is a quick & simple print that is easy to assemble.
** 9/4/2021
changed roller files - print 4 copies of the half roller (filament roller-a.stl) standing up, no supports required. Print 2 copies of the joiner bar (filament roller-b.stl). After printing assemble 1 joiner bar & 2 roller halves to build a complete roller. Repeat for the second roller.
Source files on Tinkercad:
https://www.tinkercad.com/things/lCaFUeaaFdl
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.16
Infill:
15%
Notes:
Produce two rollers and one base. Supports are not needed. No post print cleanup should be required.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Nikdfish
