FPV Rover 2.0 body variations

These are variations on the central body components for the FPV Rover 2.0 by Markus_p https://www.thingiverse.com/thing:2952852, using his work as the foundation. They include a body with relief cuts to accommodate the planetary gearbox mod by escexed, a body with no front or rear structures, and a body with smooth faces on front and rear.

FPV Rover 2.0 - Body with Relief cuts.

This remix of the center body component of the FPV Rover 2.0 by Markus_p adding reliefs cut into the vertical side braces to accommodate the motor/gearbox assembly from the planetary gearbox mod by escexed https://www.thingiverse.com/thing:3488191. Not yet printed, it reflects post print modifications I made to my first build.

This was made on Tinkercad. Edit it online https://www.tinkercad.com/things/jQ51IEUFJvf

FPV Rover 2.0 - Body with open front & rear. This was done as a starting point for additional potential modifications to the body of the FPV Rover 2.0 by Markus_p. The attachment perimeters for the track nacelles & center top are unchanged. Not intended for direct printing without modifications.

This was made on Tinkercad. Edit it online https://www.tinkercad.com/things/dlpSYlS3fvT

FPV Rover 2.0 - Body with smooth front & rear. This was done as a starting point for potential modifications to the body of the FPV Rover 2.0 by Markus_p, or just to have a simplified design. The attachment perimeters for the track nacelles & center top are unchanged. Printed & used.

This was made on Tinkercad. Edit online https://www.tinkercad.com/things/d3BPbBb91Ym

Rover 2 Smooth ends - open sides. This was done as a starting point for potential modifications to the body of the FPV Rover 2.0 by Markus_p, or just to have a simplified design. Sides were left open with no reinforcements. The attachment perimeters for the track nacelles & center top are unchanged. Printed & used.

This was made on Tinkercad. Edit online https://www.tinkercad.com/things/ehoXt7WaxPY

Category: R/C Vehicles