Ableton Push 2: Tabletop Stand

Updated model: slightly wider for stability and better recess for the magnetic sheet.

This stand will lift an Ableton Push 2 controller to an angle of 35 degrees which will allow much better visibility of the screen and improve access to buttons and knobs when on a desk. The stl model is for the right-hand side so just use your slicer to print a mirror version for the left side.

You will need (cut from A4 sheet):

2@ 190 x 31 x 0.85mm ferrous sheet (this thickness will sit flush with the stock rubber feet on the Push 2)

https://www.amazon.co.uk/gp/product/B07TVD53KN

2@ 286 x 31 x 1.5mm magnetic sheet 1.5mm thick (will fit perfectly in the recess on the stand)

https://www.amazon.co.uk/gp/product/B0CDQJPP75

I also used some 35x35mm squares of grip tape on the bases to stop it sliding around on my desk.