December 23, 2022
Description
The model is about 6 inches wide, and 9 inches tall. I would recommend scaling down the faceplate, eyes, and mustache to about 98% so that it can fit in and be removed from the chassis in order to store items inside. If you do not want to use the inside for storage, 100% will work well, albeit a little tight. The screws and receiver also have a tight fit, and scaling them down to 98% as well or slightly less may help on a less calibrated printer. Also, print two eyes, and four screws.
License:
Creative Commons — Attribution — Share Alike
GreyH20
