Improved Cherry MX Compatible Flat Top Keycap

Rebuilt and improved upon @JoshPeddle_593948 's model.

1. Higher polycount / detail
2. Strong stem
3. Reduced wobble
4. Inset stem slightly for improved look

Print recommendations:

• Print keycap face down on build plate
• 0.2mm nozzle or 0.4mm nozzle with Arachne wall generation
• Any layer height works, but recommend 0.10 - 0.16 mm for more detail

Little dot on the stem goes in the front-right corner when flipped as the stem is wider horizontally.