Portable Sharps Needle Container

This is a portable, disposable Sharps needle container (for diabetic needles, etc) with one hand closure and snap lid. This model is NOT FDA-cleared and should be used only when FDA-cleared sharps containers are not available.

The model prints in two parts - the container and the screw-on lid. The lid is attached with a living hinge and the cap can be snap closed with one hand. Once used, the container and contents should be disposed of in accordance with proper sharps disposal procedures.

• Layer height 0.15mm
• Infill 15% 
• Perimeters: 3 
• No Supports
• No Brim
• Model Weight: 26.7g

Using the OpenSCAD file requires BOSL 2.0 (https://github.com/BelfrySCAD/BOSL2), text_on_SCAD (https://github.com/brodykenrick/text_on_OpenSCAD) and threads-scad libraries (https://github.com/rcolyer/threads-scad).