19" rack 8 Prusa MK3.x/MK4 build plates holder + drawer with 1U in height.
Parts needed:
- 4x M3x18 screw
- 4 mounting screws fitting to you 19" rack
Print instructions:
- You will need a bigger printer like Prusa XL or e.g. Sovol SV08 to print this =)
- Print front parts standing
- Print the drawer on its bottom
- No supports needed
- Optional brim needed, depends on your bed adhesion
- Textured sheet used
- PLA used
Happy printing =)
License:
Creative Commons — Attribution — Noncommercial
AWSW
