Planty Potty Drainer 3000

So appearently a plant has a pot that the soil sits in, and this pot is sat inside another pot… 

Potception!

Anyhow; The girlfriend requested something to set the inner pot on, because - and I did not know this - plants dislike having soggy bottoms of their inner pot when you water them. 
Water then gets stuck on the outer pot around the inner pot, causing roots to rot or the plant to get too much water, because you watered it to much - like the caring “idiot” you are. 

Sassy plants. 

I therefore made this model, which is very basic, but is revision number 2. 
The first model was way skinnier, and the smaller inside pot (or whatever that is called in plant language) didn't sit right, making the plant look like the Tower of Pisa. 
Apparently that is not funny, and I was wrong for laughing about it, so I made revision number 2. 

Number 2, called the “Planty Potty Drainer 3000” (all cool things have a “3000” or “Turbo attached to them, seemingly by international law), takes the lack of standing area for the inner pot that was apparent in rev1 into account, and does something about it. 

Download, print, put the Planty Potty Drainer 3000 inside the outer pot, and watch your plants thrive as they no longer have soggy bottoms. 
The model diameter is set to 100mm so it should be easy to scale in the slicer to fit your need (unless you are an American, and does not know the metric system).
 

Rev2 is recently tested to being able to withstand the weight of one chubby Norwegian. 
Fancy that. 
Your Monstera should be alright using this I recon, but no promises!

OH, by the way! If you have one of those pots that has a “nub” in the center of it, the Planty Potty Drainer 3000 will wobble. To make it not wobble, make a negative modifyer to the middle leg in your slicer, and make it the thickness of the nub. See picture for explanation.

-----------------------------------------------

Print instructions:

Layer height: Whatever you want.
Infill: Whatever you need.
Perimeters: Minimum 3. 
Material: Whatever tickles your fancy. 

The model should be printed on its head, as per the pictures.