August 9, 2024
Description
Warning
It is small parts (especially for this character), it is working on my side but sometime according your printer and your setting it could provide a poor result.
Definition
None.
Printing
Is required the same printer size than 3D SETS has defined.
Infill 15% and layer 0.15mm is fine.
It works without support.
Build
Use 3D SETS Family universal connector.
No screw, may be some glue could be fine.
Cut to adjust the beard
Feedback
It is welcome, post your builds.
Remark
None.
Version
v1/v20240809 1st upload.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mbe075
