August 9, 2024
Description
Coupler for clothes-drying / laundry rack.
Top-clip element optimized for 13mm diameter pipe and bottom-socket element optimized for 16mm.
Should be very tight fit, can be scaled to fit other pipe diameters, as top-clip element can accomodate some variations, especially for smaller diameters than nominal.
Provided in printing orientation. Suitable for materials like PETG, PCTG, ABS etc. I wouldn't recommend PLA.
For this one I also recommend not to go up with layer height, to achieve best possible layer adhesion and strength, so it will not crack during assembly.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Dorma 3D
