Hueforge Deadpool and Wolverine heart

Print the two parts of hueforge 🖨. Assemble them with glue following the image. Make sure each piece fits perfectly 🔄 for a successful assembly ✔. Enjoy the process and your new hueforge! 🎉

First course instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm

Swap Instructions:
    Start with Black
    At layer #7 (0.58mm) swap to Jade White
    At layer #14 (1.14mm) swap to Black
    At layer #16 (1.3mm) swap to Red
    At layer #22 (1.78mm) swap to Jade White for the rest.

Second course instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm

Swap Instructions:
    Start with Black
    At layer #7 (0.58mm) swap to Jade White
    At layer #14 (1.14mm) swap to Black
    At layer #15 (1.22mm) swap to amarillo for the rest.