Cat Sleeping Hueforge Bookmark

This is my design of a marker with a cat sleeping on the books using the Hueforge software. Today is World Cat Day . Perfect for gifting or using in your reading. This file is suitable for all printers, I used a layer height of (0.08) and then (0.16) for the rest.
Also put 100% density of the filling and with a rectilinium filling pattern.
It has a size of (150 mm x 50 mm x 1.6 mm).

Please make sure to put the parameters well, you will find two designs, both with the same size, one of the designs has a hole above to put a silk fringe on it.

Feel free to scale the X-axis and the Y-axis, but do not modify the Z-axis .

Filaments used :

PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5

This print uses 3 unique filaments.

Swap Instructions:

Start with Black.
At layer #12 (1.04mm) swap to Grey.
At layer #15 (1.28mm) swap to White for the rest.

👉 Don't forget to follow us and show us your impressions that we like so much. 👈

Enjoy!!!