GoPro Compatible Mount for Ikea Skadis with T-Nut

Copied the below from the source file (check out the original model designer)

@6d6178 - Original file - Thank you

Action cameras need action mounts! This is a very strong mount for IKEA SKÅDIS pegboards that is compatible with GoPro cameras and accessories as well as the Modular Mount System. It uses the Skadis T-Nuts for a very secure hold and easy installation.

• Check out the Modular Mounting System Arms for compatible arms and knobs.
• You can use any GoPro-compatible knob, including original ones.

BOM

Print 2 x T-Nuts for each.

Printing

The STL files are pre-rotated. Print them as-is.

• Layer height: 0.2mm
• Extrusion width: 0.4mm
• Perimeters: 6 (important for strength!)
• Infill: 20% or more
• Solid layers: 4 top, 4 bottom
• Supports: None

Assembly & Installation

1. Assemble the parts as shown below.
2. Leave the T-Nuts loose so that there's at least 2mm between the T-Nut and the printed mount.
3. For installation, orient the T-Nuts in the vertical position and stick them through the pegboard holes.
4. Tighten the M2.5 screws. The T-Nut will automatically orient itself in the horizontal position.