Ikea Detolf Extra Shelf Support (Heat Set Insert)

This remix uses a heat set insert nut to simplify the design and provide easier assembly.

Printing:

• Use PETG, do not use PLA
• 0.4mm nozzle, 0.2mm height, 25%+ infill, 4+ walls
• No brim or supports necessary

Materials:

• M3x12mm Socket Head Cap Screw
• M3x4x4.2 Heat Set Insert Nut
• Overture PETG Gray
• 7x1.5mm Rubber Feet

Revision Log:
Rev0 - Initial release

Note: Amazon links are affiliates.