Adjustable clicky X-endstop switch adapter for Cartographer CNC toolhead mount

Moving from 2209 driver setup to 5160Plus I was unable to get my sensorless XY homing to work like it was with 2209s. Decided to buy clicky switches with a bit longer metal spring so I can actually use my XY joint as endstop switch bump. Few tests and remodelings and this is the final product. 

Takes couple of grams of material, print with your regular print settings. Holes are sized so you thread the M3 low-profile (up to 1.7mm of head height) bolts directly into the plastic. For attachment and adjustments you can use normal M3 bolts with length from 6 to 10mm as there is plenty of thread in the CNC toolhead mount. I highly recommend using M3 and M4 washers should the plastic get warm enough and give way over a time period so it would not slip past the bolt head edge.

Do note that the final uploaded model is a bit different than the pictured one as the belt clamps got a bit in the way and then pushing rest of the toolhead parts about a millimeter forward. Removed a bit from the top and some from the bottom so it now fits in without colliding with the structure.

You might need to drill the switch holes a bit with a 2.9-3mm drill but not all the way through so there's some material for the bolts to grab to. You can use a 3mm nail aswell, it'll just melt and push the plastic to the side and leave a perfect hole for M3 bolts.

Fits with BTT Eddy if you use an offset adapter which you can find at BTT Eddy adjustable mount for Cartographer by minilogique | Download free STL model | Printables.com.