Gridfinity Refined Base STP/STEP Files

These STP/STEP files can be used with a wide variety of CAD software to create your own storage bins. 

Remix Details:

This is actually a clean sheet of paper model, the original models from grizzie17 were not used or modified but they were referenced, so I am leaving this as a remix. These files have slightly different dimensions for the side insert magnet slots from what grizzie17 made to better accommodate standard 0.20mm layer height and 0.40mm nozzles. There is also no female screw.

Printing:

• PETG or PLA
• 0.4mm nozzle, 0.2mm height, other settings dependent on application
• No brim or supports necessary

Materials:

• Magnets:
  • 6x2mm Neodymium
• Filament:
  • Overture PETG
  • Duramic 3D PLA+

Revision Log:
Rev0 - Initial release

Note: Amazon links are affiliates.