This organically inspired replica of no plant in particular can blend in to your garden foliage until it begins spinning horizontally under a gentle breeze.
To suspend your Spinning Flower above ground, a tent peg styled spike is provided and a flat base is also provided for hard ground. The step file is provided for the bearing post to make it easy to lengthen for more ground clearance if desired.
A skateboard bearing (608) is required to be inserted into the Spinning Flower. Super glue is needed to glue the bearing post to either the peg mount or flat mount.
Slicer Settings
Spinning Flower:
- Orientation - sitting on the bottom, nodules away from bed
- Layer height - 0.20
- Wall line count - 2
- Top layers - 4
- Bottom layers - 4
- Infill density - 20%
- Infill pattern - cubic
- Support - Required
- Support Placement - Everywhere
- Build Plate Adhesion Type - Brim
Bearing Post:
- Orientation - standing up
- Layer height - 0.28
- Wall line count - 3
- Top layers - 4
- Bottom layers - 4
- Infill density - 25%
- Infill pattern - cubic
- Support - Required
- Support Placement - Touching buildplate
- Build Plate Adhesion Type - Brim
Ground Spike:
- Orientation - on its side along one of the spike ridges
- Layer height - 0.28
- Wall line count - 3
- Top layers - 4
- Bottom layers - 4
- Infill density - 25%
- Infill pattern - cubic
- Support - Required
- Support Placement - Touching buildplate
- Build Plate Adhesion Type - Brim
Flat Base:
- Orientation - resting on large flat surface
- Layer height - 0.28
- Wall line count - 2
- Top layers - 3
- Bottom layers - 2
- Infill density - 15%
- Infill pattern - cubic
- Support - None
- Build Plate Adhesion Type - None
Jesster
