Flexi Holding Cat (Print-in-place)

Official Remix "Extra Size Cat" is released!!
https://www.printables.com/model/1146999-official-remix-flexi-extra-size-cat-print-in-place 
Since there were many requests for longer cat, I decided to release it as an Official Remix.
 

This model was inspired by the way a cat's torso lengthens when it is carried in the arms (like Longcat meme). Finally, the model was finished with a high degree of flexibility, allowing it to curl up and lean back in a variety of poses.

 There are two types of models: a standard length and a long type, which is the same as when the cat is stretched out in the arms. Choose whichever you like and hug the cat!

Print in Place with no supports. No assembly required. Please take pictures of your Flexi and share them with us!

Print Settings

Printer Brand: Bambu Lab

Printer: A1 Mini

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 15-20%

Filament: MIKA3D PLA Pink 
 

Notes: 

Rafts: No
Supports: No
Build Plate Adhesion Type: Skirt or None
Layer Height: 0.1-0.3mm
Infill:15-20%
Filament material: PLA

{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Right
Z Seam Corner Preference: Hide Seam

{Recommend: Bambu Lab Printer}
Layer Height: 0.2mm
Seam Position: Aligned
Wall Loops: 3
First layer: 30mm/s
Outer wall: 30mm/s
Prime Tower Width: 10mm
Prime Volume: 10mm^3
Prime Tower Brim Width: 0mm

💰Commercial Use💰

This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory.

https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver 
https://flexseedsshop.etsy.com 
https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver 

On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁
In addition, you can get monthly exclusive models and generous welcome pack!!
https://www.patreon.com/FlexSeeds 

⚠Warning⚠

Be careful in environments with young children and pets! 

This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force! 

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place. 

After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.