FlightSimBuilder GNS530 base for Honeycomb Bravo Throttle Quadrant

Usually the Honeycomb Bravo quadrant is placed to the right of the yoke. This model let's you mount the FlightSimBuilder GNS530/GNS430 at an angle to properly see the screen.

I included 2 models for you to choose. The difference is how much of an angle you need the GNS530 at. This depends on your setup. In my case I used the 74 degrees angle (i.e. more angle than the 81 degrees).

I printed in PLA. No support is needed.