August 13, 2024
Description
Some Printers come with weak bendy spool holders… and some come without one at all…
This Holder can be attached via T Nuts to any V- or T-Slot Extrusion.
It can hold a full 1kg spool just fine in my experience.
Assembly: print all three parts and glue the holder into the arm then glue the backplate to keep everything in place. then let the glue dry.
I recommend to print with at least 3 perimeters and 20% infill (i used Gyroid)
License:
Creative Commons — Attribution — Noncommercial
7
CmdrSoyo
