Easier Install Shelf Bracket

Another approach to your standard shelf bracket. Instead of having the bracket extend at 90 degrees from the wall, angle it 20 degrees to the side. Makes it so much easier to screw the wall screws in and still gives great support. 

The shelves in the pictures are 140mm deep.  

The bracket is 54mm high and extends 122mm from the wall.

It very sturdy and supports everything I want to put on the shelf but cannot recommend the maximum load it can take as it depends on which 3D printer used, the material it's printed with, slicer settings used, etc

Recommended print settings:

• I printed in PETG for strength.
• Print the bracket flat on its side
• 0.2mm layer height
• 6 layer perimeter walls
• 30% infill
• No supports required